Improving Production Efficiency
Customer's Problem
Processing takes too long. For mass production, the customer wants to improve production efficiency.
AIMEX's Proposed Solution
Solution Through Changing Operating Conditions
There are three main ways to improve production efficiency and shorten processing time.
- Change the bead material
- Use smaller beads
- Increase the peripheral speed
Efficiency can be improved by increasing collision frequency while maintaining sufficient impact energy.
Example: Changing the Bead Material
Let's look at changing the bead material as an example.
Using zirconia beads, which have high grinding energy, can shorten grinding time.
Three types of beads—zirconia, zircon, and glass—were used
to process calcium carbonate
(Material)
Calcium carbonate
(Bead materials)
Zirconia, zircon, glass
(Results)
Glass beads required 5 passes to reach a median diameter of 0.6 µm, while zirconia beads reached it in 3 passes.
Changing the bead material to zirconia reduced processing time by 40%.
[Related page]
Technical data: "About Bead Materials"
https://www.aimex-apema.co.jp/case/2018/03/20/43 (Japanese)
Bead Mill Guide: "Factors — Bead Milling Is Determined by Impact Energy and Collision Frequency"
https://www.aimex-apema.co.jp/case/2019/07/03/116 (Japanese)
When Agglomeration Slows Processing
Particles may be ground during processing but agglomerate when diluted for measurement.
In this case,
• Add (or increase) additives such as dispersants.
is one solution.
It is also possible to avoid affecting the processed particles, for example by adding dispersant only for particle size measurement.
In bead milling, results vary with operating conditions and formulation. Please feel free to contact us below to discuss whether your material can be processed.

