Reducing Contamination
Customer's Problem
Impurities such as contamination get mixed in and affect product performance. The customer wants to reduce contamination.
AIMEX's Proposed Solution
Solution Through Changing Operating Conditions
There are three main ways to reduce contamination.- Lower the peripheral speed
- Change the bead size
- Change the bead material and wetted-part material
Lower the peripheral speed
Lowering the peripheral speed reduces impact energy.
Change the bead size
Contamination is proportional to processing time.
Therefore, using smaller beads to improve efficiency shortens processing time.
If the peripheral speed has been lowered, impact energy may become insufficient, so larger beads may be used
to compensate.
Change the bead material and wetted-part material
Switch to materials with less wear (such as alumina or silicon nitride).
Solution Through Bead Mill Selection

Most contamination comes from the beads. One factor that accelerates bead wear is forcing beads to move at high speed through narrow gaps.
This is why we propose the Neo-Alphamill.
In this mill's high-density bead layer, the beads move slowly. Rather than grinding by forcing beads together in a narrow space, they act on the particles steadily and thoroughly. This high-density layer reduces wear and suppresses contamination.
Image of the high-density bead layer
Contamination: conventional mill vs. Neo-Alphamill

Through this carefully designed bead behavior, the Neo-Alphamill keeps contamination low.
In bead milling, results vary with operating conditions and formulation. Please feel free to contact us below to discuss whether your material can be processed.

