How to Improve the Reproducibility of Three-Roll Mills|Why Customers Choose Easy Roll
The gap between the rolls has a significant impact on three-roll mill quality. To improve reproducibility, the roll gap must be maintained at all times. Gap adjustment based on the operator’s intuition depends on individual skill, and with hydraulic roll pressing, the gap fluctuates during processing, making reproducibility unstable.
With numerical management of the roll gap in 1µm units, the same quality can be reproduced no matter who operates the machine.

When choosing a three-roll mill, the most important criterion is whether the gap can be managed correctly.
Why Reproducibility Is Unstable with Three-Roll Mills
Gap Adjustment Based on Intuition
When adjustment relies on gap gauges and experience, slight differences between operators lead to variability in quality.Position Fluctuation with Hydraulic Roll Pressing
With hydraulic systems, the hardness and particle characteristics of the material can apply a load greater than the pressing force, causing the actual gap to fluctuate.Reference Position Accuracy Is Not Maintained
Even if the initial setting is accurate, reproducibility gradually deteriorates if the reference position is not maintained.Why Customers Choose Easy Roll, AIMEX’s Three-Roll Mill
Numerical Management of the Roll Gap in 1µm Units
AIMEX’s three-roll mill, Easy Roll, uses a Position Repeater to set and manage the roll gap in 1µm units. Just match the numbers by operating the handle, and anyone can easily reproduce the same quality.

(Analog Version)


Test Data Showing the Difference in Reproducibility
In a test, operators A and B processed AIMEX’s standard paste (alumina) with and without a Position Repeater (PR) to check reproducibility.
| BR-150 | Without Position Repeater (roll gap adjusted with a gap gauge) | With Position Repeater | ||
|---|---|---|---|---|
| Operator | Operator A | Operator B | Operator A | Operator B |
| Particle size | 5.6μm | 19.0μm | 5.4μm | 5.4μm |
| Production volume | 3.3L/hr | 10.6L/hr | 4.3L/hr | 4.4L/hr |
| Result | △Variability in particle size and production volume NG |
◎No variability! OK |
||
| Processing state | ![]() Inconsistent |
![]() Consistent |
||
By managing the roll gap with a Position Repeater, anyone can maintain the same processing quality.
A Mechanically Fixed Structure That Does Not Fluctuate During Processing
Quality with hydraulic systems is said to be inconsistent because particle size, hardness, and other factors apply a load greater than the pressing force, widening the gap and causing it to fluctuate. With Easy Roll, the roll position is mechanically fixed even during processing. As a result, the roll gap does not fluctuate due to the material, and the actual position stays consistent with the set value.
Why Accuracy Is Maintained After Installation
Recalibration of Reference Position Through “Periodic Inspection” and “Zero Adjustment”

“Zero Adjustment” of Easy Roll is a critical process to reset the machine-specific reference position (zero point) and ensure reproducibility of roll positioning. By performing this adjustment, roll position and gap can be consistently reproduced with high accuracy in daily operation, ensuring stable processing quality as per the set values.
Specifically, the roll gap is measured using a zero-adjustment unit, and the reference position is recalibrated.
- Small Tabletop Machine (BR-150VⅢ / HCVⅢ): Service available by simply sending the unit to us.
- Production Machines: On-site zero adjustment service is available.
Safety Functions Fully Equipped as Standard
Safety is a minimum requirement when using a three-roll mill. AIMEX’s Easy Roll comes with safety functions as standard, so you can use it with peace of mind.




Watch the video to see how to clean the rolls safely and how the safety mechanisms work.(Japanese)
Comparison with Conventional Three-Roll Mills
| Item | Conventional Three-Roll Mills | AIMEX’s Easy Roll |
|---|---|---|
| Roll gap management | Artisan skill based on intuition using a gap gauge/ Managed by hydraulic pressing |
Just operate the handle and match the numbers / Numerical management in 1µm units |
| Quality reproducibility | Depends on the operator / With pressing control, the position fluctuates depending on the material | Mechanical control with no position fluctuation |
| Maintaining the reference position | No clear method for resetting | Accuracy maintained through periodic zero adjustment |
| Safety | Often available only as options | Standard features ensure safe work during operation and cleaning |
With Easy Roll:
- Even less experienced operators can reproduce the same quality
- Roll gap values can be shared numerically
- Condition management becomes clear
- Tracing the cause of quality problems is easy
Reproducibility becomes a matter of “systems,” not “individual skill.” This advances standardization on the shop floor and reduces the burden of quality control.
Do You Have Any of These Concerns?
- Not sure if quality can really be reproduced
- Not sure if it will work with your own materials
- Not ready to decide on installation right away
That is why we offer prototype testing and equipment rental services. In prototype testing, our technicians help optimize your processing. With equipment rental, you can process highly confidential raw materials and products in-house.
Feel free to contact us. Online consultations are available, and we welcome inquiries about conditions only.
FAQ
Tell us about your current processing conditions and challenges. Our sales staff and technicians will give you specific answers.Q.
Can I replace my existing three-roll mill? Can I process under the same conditions as my current three-roll mill?
A.
Yes. We will ask about your current equipment specifications and processing conditions and propose the optimal configuration. You can also consult us in advance about whether replacement is feasible and what improvements to expect.
Q.
How much does it cost?
A.
It depends on the specifications and size. Our proposal covers not only the installation cost but also the benefits of stable quality and fewer problems through improved reproducibility. Please tell us about your current conditions first.
Q.
Can I consult you even if I haven’t decided to purchase yet?
A.
Of course. We welcome consultations even at the information-gathering or comparison stage.


